Disconnect the keg coupler from the empty keg and connect to a full keg in the usual manner. Follow the following operating instructions to install the DFC 9500. It's as easy as 1..2..3

*Download the instruction sheet in French, German, and Spanish*

Push vent button. Wait a few seconds for foam to settle and vent again, ensuring the chamber is generally full of beer.

Twist Up Twist the knob counterclockwise until it stops! Float will rise to top of chamber.

Lock Down Twist the knob clockwise fully until it stops. That's it! You are now ready to pour beer!

Cleaning (Authorized Personnel Only) When flushing lines, twist knob counterclockwise, until it stops in the twist up position (#2). Operate the vent button a few times while flush cleaning to ensure the vent will not "stick" in an open position during regular use.